April 22, 2024
and even has auxiliary heating equipment, sunshade system and ventilation

Contact us

cooperationlike@gmail.com

2. Sunshade. The membrane structure parking shed adopts polycarbonate material with high impact resistance, and its strength is about 200 times that of glass. The raw materials are imported from Germany and processed in China. Through the double-sided co-extrusion process, the anti-ultraviolet material (UV) is added, which can effectively block more than 98% of the ultraviolet rays, protect the car surface paint, effectively control the continuous rise of the interior temperature, and in direct sunlight. The temperature in the car can reach more than 60 ℃ and can be effectively reduced to about 40 ℃ after installation. At the same time, it also has flame retardant effect, and can be used normally for more than 30 years in the environment of-30 ℃ to 60 ℃ (137 ℃ thermal deformation). The downcomer is made of high-strength aluminum alloy and has a unique user-friendly design to avoid the second pollution to the car and you when the roof water falls to the ground. The structure is reasonable and easy to clean, and it is convenient for the membrane structure parking shed to remove dirt in the pipe.

and even has auxiliary heating equipment, sunshade system and ventilation

The warm sunshine room uses strong thermal insulation profiles and glass, and even has auxiliary heating equipment, sunshade system and ventilation system, which can meet the activities, work and living of people who are not affected by the season.

and even has auxiliary heating equipment, sunshade system and ventilation

Audio failures are generally divided into two categories: one is caused by improper use, and the other is caused by the weather. The main factors that affect the normal work of car audio in late summer and early autumn are high temperature and humidity. Because the car audio is mostly installed in the upper part of the dashboard, in order to avoid the exposure of the sun, the effect of using sunshade is better. If the door and window sealing strip is not strict, it should be replaced, otherwise the loudspeaker is easy to rust and damage, or even cause short circuit to burn the main engine. With the coming of the rainy season, the humidity increases, and there is often a layer of fog on the surface of CD records, which makes it difficult to read the disc. It is best to scrub it every once in a while. If the CD drive is modified, in order to avoid dampness, do not install it under the floor and seat, preferably on the high part of the car body, but not on the rear windshield, too high temperature will accelerate the aging of electronic components and laser head.

and even has auxiliary heating equipment, sunshade system and ventilation

It is necessary to do a good job of heat preservation at night and ventilation and humidity reduction during the day. The night temperature in early spring is still low, which needs to be covered with grass curtain, sunshade net, non-woven fabric or multi-layer mulching; the temperature rises rapidly during the day, coupled with the current high humidity in the field, so it is necessary to timely control and adjust the indoor air humidity and temperature in the shed. On a sunny day, after the temperature picks up after 08:30, ventilation should be carried out gradually, and the mulch such as non-woven fabrics should be removed in time to increase the light; the shed should be closed and the warmth should be covered before 4 p.m. In case of cloudy and rainy weather, it is still necessary to properly ventilate during the day to reduce the humidity in the shed. In addition, in the alternate season of late winter and early spring, the weather changes greatly, so we should pay close attention to the weather changes to prevent the occurrence of late spring cold. After the middle of April, the average temperature is stable above 15 ℃, which can remove the inner shed, prolong the opening time of the outer shed, increase the light time and intensity, reduce the humidity in the shed, and control the occurrence and prevalence of diseases such as leaf mold and gray mold.

6. Avoid direct sunlight and high temperature in the car. Dashboards and central control areas are mostly made of engineering plastics. plastics will age and fade when exposed to the sun for a long time, although manufacturers will do strict aging tests during development, but it is good to pay more attention. So it is necessary to keep a sunshade pad all the time;