McDonnell Douglas 001 is equipped with a suspended McDonnell Douglas 001LED display dashboard and a small solar panel on the front sunshade, which can power the dashboard and body lighting parts or batteries. This greatly improves the durability of the car.
The sun board integrates daylighting, thermal insulation and sound insulation, which can be used for greenhouse, furniture canopy, office sound insulation, outdoor advertising light box and so on. Foreign countries even appeared in addition to the supporting structure, pure polycarbonate material of large transparent lighting house, a sunshine, crystal transparent, warm and pleasant. In terms of greenhouse construction, there are greenhouses built with sunboards, gables and sidewalls using sunboards; in terms of greenhouse efficacy, there are production-based greenhouses, trade-oriented greenhouses dominated by the flower market, and greenhouses dominated by scientific research. Sunpanels are a widely used building material and can also be used in sunshades and canopies.
KOOLIFE car sunshade front windshield sunscreen cloth interior thermal baffle: this sunshade is the front windshield cover, can effectively isolate ultraviolet light and heat, reduce the car temperature, using double ice wire cooling material, has a good cooling effect, suitable for a variety of cars and SUV. The product was evaluated by 50000 people on JD.com Mall, with a comprehensive score and a good rating rate of 98%.
The car shed with thermal insulation structure as thermal insulation material can withstand the temperature of less than 40 ℃, the sound insulation structure is weaker than the asbestos large sound insulation pad, and there is no power load imbalance in the chassis, so that all domestic drivers can avoid some problems caused by the insensitive environment of rain and snow. Of course, it is appropriate to be molded into one body, which meets the requirements of energy saving. -related news Chengdu district is complex, and the braking dimensions of small cars vary widely from place to place. therefore, although the new shed has a variety of braking systems, it does not require high machining accuracy of its parts. all the parts and braking systems follow the fire prevention advantages that are widely available. The main parts suppliers are as follows: complete fresh-keeping device, air energy water heater, structural shock absorption water tank, instrument panel, side skirt board, cover, sunshade, glass wool, ceiling UV protection (radiator), power water tank and so on.
News: Hunan Yongzhou grouting Machine address [Co., Ltd.] Welcome to you at present, spray-free plastic has been successfully used in side skirts, central control panels, DVD panels, glove boxes, sunshades, dashboards and other auto parts in the automotive field. Bioplastics bioplastics are produced by using original plants as raw materials, such as sugar cane and corn, under the action of microorganisms. Commonly used plastics generally use petroleum products, and there are often small molecular harmful substances that do not fully react, while bioplastics, due to the use of low-toxic and low-harm renewable raw materials, greatly reduce the VOCs volatilization in the car after turning it into automobile interior parts. In addition, this bioplastic can be used for subsequent use, and is a more environmentally friendly type of plastic.
two。 Sunshade. The membrane structure Suzhou parking shed adopts polycarbonate material with high impact resistance, and its strength is about 200 times that of glass. The raw materials are imported from Germany and processed in China. Through the double-sided co-extrusion process, the anti-ultraviolet material (UV) is added, which can effectively block more than 98% of the ultraviolet rays, protect the car surface paint, effectively control the continuous rise of the interior temperature, and in direct sunlight. The temperature in the car can reach more than 60 ℃ and can be effectively reduced to about 40 ℃ after installation. At the same time, it also has flame retardant effect, and can be used normally for more than 30 years in the environment of-30 ℃ to 60 ℃ (137 ℃ thermal deformation). The downcomer is made of high-strength aluminum alloy and has a unique user-friendly design to avoid the second pollution to the car and you when the roof water falls to the ground. The structure is reasonable and easy to clean, and it is convenient for the Suzhou parking shed with membrane structure to remove dirt from the pipe.
Car interior non-metallic parts assembly roughly has: seats, carpets, ceilings, dashboards, auxiliary instruments, door panels, column side decoration panels, air conditioning, steering wheel, sunshade panels, coat racks, baggage compartment carpets, left and right baggage compartments, sealing strips, wire harness, damping boards, sound insulation pads 17 kinds, the main material can be divided into: felt, plastic, foam, rubber category. Felt risk components are mainly: carpet; plastic risk components are mainly: door panel decoration panel, dashboard, auxiliary dashboard, etc.; foam risk components are mainly: ceiling, seat, front wall sound insulation pad and so on; rubber risk components are mainly: sealing strip. After testing, this paper mainly focuses on four parts: carpet, door interior panel, ceiling and sealing strip.
Plastic products made from plastic particles are used in many fields. Plastic materials commonly used in agriculture include films, pipes, plates, ropes and woven bags. Plastic greenhouse, crop, chemical fertilizer and drug packaging are mainly used in plastic pipes, farmhouse construction, animal husbandry protection, agricultural machinery and appliances, fishing nets, aquaculture buoys and so on. As a new type of packaging material, plastic has been widely used in the field of packaging. For example, various hollow containers and injection containers (turnover boxes, containers, buckets, etc.). Packing film, woven bag, styrofoam, binding rope and packing tape. In terms of transportation, the plastic used by vehicles, trains, ships and other vehicles and corresponding auxiliary equipment increases year by year by each vehicle or ship. Types include fuel tank, bumper, sunshade seat, door handle, steering wheel, dashboard and so on.
The car key door can be pulled out in two different gears, one of which is powered by a CD player. I just got it and changed a battery when I ran out of power. When I first got it, there was a noise in the back of the rear seat, the right rearview mirror was loose, the electric adjustment of the rearview mirror failed, the speedometer did not work (the fault was cured after changing the battery), the CD machine did not read the disc smoothly, and the front fog light was not lit. The rearview mirror reading lights and sunshade make-up mirror lights are not lit (the front car owner did not connect the line when the roof was packed), the rising window of the right front window was slow, and the valve chamber cover and steering power tubing leaked oil.
Car owner Mingjie: I like the humanized storage space of Harvard F7. Take the storage space next to the main driving position, for example, directly below the center console is the most frequently used open storage space, where you can easily put down a mobile phone and provide wireless charging. The storage compartment next to the star cloud handle is very convenient for personal belongings such as car keys or change. Under the star cloud block, there is also a mystery, the hollowed-out center console can also place items, simply not too awesome! The sunshade at the top of the head provides cosmetic mirror and storage clip design, and has auxiliary lighting function, which is very practical for female car owners. It is worth mentioning that there is also a small storage compartment on the lower side of the air conditioning outlet in the rear row of the Harvard F7, which makes it no problem to put mobile phones, paper towels and cleaning bags.
